30" long black poplar (populus nigra) shafts, just under 1/2" at the shoulder tapering down to 8mm at the nock. Tapered cow horn inserts...

Had some time to fiddle this afternoon, so here's a set of 1/2" MoL Type 16 heads forged from genuine charcoal rolled wrought iron.

Just got these brilliant photos from a customer of some of my arrowheads fitted to his arrows. Cheers John!

This is another copy of the same Mary Rose bow I tend to replicate, MR79A0807. It's made from the same tree as 2 other copies of the...

Set of heavy roving / field arrows. 12mm lime shafts with tapered ox horn inserts White and grey turkey fletchings bound with red silk 6...

Set of budget target arrows for a 40lb bow Spine matched 5/16 Boyton pine shafts Red nocks Red barred and solid black turkey fletchings...

[SOLD] 5 late Medieval military arrows made entirely with traditional materials and methods. Aspen (Populus tremula) shafts, hand planed...

Sneak peak of a work in progress bow. Currently at 160lb at 28". Might tiller the last 2" but will probably leave it at 28" so it's...

Black poplar (Populus nigra) shaft tapering from 1/2" down to about 8mm at the nock, with a lovely dark cow horn insert glued with hide ...

Here's the other three PhD arrows complete. The nocks are fitted with the horn inserts found in later medieval arrows, and the fletching...

Here are the first three arrows complete for the PhD student working on osteoarchaeology. The arrowheads specified were a MoL Type 1,...

Two 1/2" heavy diamond section Type 9s Two 1/2" Type 10 short bodkins One 1/2" swaged M2 head One 1/2" fire-welded Type 16

I was at Hector Cole's workshop recently chatting with him about his lovely Type 13s, and during my week at the Chalke Valley History ...

Very excited to say that this beautiful forge will be my new office! Twin hearth so I can run proper workshops, and a stunning 300lb...

The start of a commission going to the University of Edinburgh, for a PhD study into osteoarchaeology, which will involve shooting...

More Type 9 and 10 heads, this time with 1/2" sockets.

Type 10 and Type 9 with 3/8" sockets for Ian Thackray, an exceptionally talented blacksmith who has potentially figured out a new...

My home for the week! The beautiful Chalke Valley for this year's history festival. Insanely hot, stupidly busy but unmissable chaos. ...

Shafts planed down to the dimensions of MR82A1757/93, with goose fletchings, cow horn inserts and verdigris compound. These are fitted ...

These have two different head types. Three have 3.5" needle bodkins with diamond section, and the other three have short diamond section...